The setting of the profile sequence to be carried out is made through a computer integrated in the machine control panel and is extremely easy, when the sole holding clamps handle stops, the operator must only push one buttom to change to the programmed following profile, thanks to the motorised sole-holder arm and its automatic positioning.

The sequence of the profiles established for each type of sole can be stored and recalled any time you wish to start the production of that kind of sole again, without having to readjust the machine again.

The P.52S3 can make on the soles also one or two profiles, like the machine model P.52SS of our construction, of which it keeps the main structure and all those advantages due to the sole auto-centering device; it eliminates, however, the need for the research of the precise alignment between the cutter and the sole by using spacers in the assembling on the cutter (thanks to the motorised sole-holder shaft) as well as having to set manually the starting and ending points of each profile and having to re-adjust the machine each time that you have to produce a type of sole previously made.

OUTPUT: The machine can work approximately 3000 pairs of soles in 8 hours with one pair loaded at a time. By loading several the output can be increased in proportion.

ACCESSORIES: Nr. 1 template and nr. 2 standard counter-templates, nr. 1 template boring jig, nr. 13 feeler rings for each spindle, nr. 1 emery cloth wheel, nr.1 feeler ring for emery band wheel, service spanner.

  • Installed power: Kw 3.5
  • Cutter spindle diameter: mm. 19
  • Tool working height: mm. 80
  • Max. milling thickness:.. mm. 70
  • Max clamp spread (without template and countertemplates): mm. 110
  • Max. air consumption:. Nl/min. 15
  • Net weight:.. Kg. 530
  • Net weight in overseas case: Kg. 580
  • Dimensions of machine: mm. 700x950x1420h
  • Dimensions of overseas case: mm. 980x1180x1660h